Home fluke 434 three phase power analyzer
FLUKE 789 ProcessMeterThe Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.Features of the Fluke 78924 V Loop power supply. Very large dual display. Enhanced backlight with 2 brightness settings. 1200 Ohm drive capability on mA source. HART mode setting with loop power and a built-in 250 ohm resistor. 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check. Externally accessible fuses for easy replacement. Infrared-port to process data in FlukeView Forms (V2.1) softwareFluke 789 features that are also included in the Fluke 787Precision 1000 V, 440 mA True-RMS digital Multimeter. 0.1% dc voltage accuracy. 0.05% dc current accuracy. Frequency measurement to 20 kHz. Min/Max/Average/Hold/Relative modes. Diode Test and Continuity Beeper. Simultaneous mA and % of scale readout. 20 mA DC current source / loop calibrator / simulator. Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp. Externally accessible battery for easy battery changes